|
| SeaTalk1 to NMEA 0183 Bi-Directional WiFi Bridge |
| The 'SeaYak' SeaTalk1 to NMEA Bi-Directional WiFi Bridge connects to
your SeaTalk1 network and converts all the data into NMEA 0183 sentences and broadcasts
them over WiFi to your computer, tablet or phone. It can also convert NMEA 0183 data sent from
your WiFi device back into to SeaTalk1. This allows you to control your ST1 equipped Raymarine
autopilot. Using the AP remote screen, you can put your autopilot into Auto, Standby and
Wind Track modes. You can temporarily nudge your course to avoid an obstacle by hitting
the +1, -1, +1, -10 degree buttons. There are even Tack Port and Tack Starboard buttons.
This incredible little unit turns any phone, tablet, Raspberry Pi or PC into a fully functional
autopilot remote control. |
|
| Just Set Up... |
Setting up is easy. Simply connect your PC, Tablet or Smartphone to Yakker's hot spot
and point your browser to 192.168.7.1 to access the settings page.
Here you can set the speed to match your NMEA device and enjoy the
freedom af accessing data from your instrumets while on deck.
You can download the setup guide here
|
|
| Hook Up... |
Simply connect the SeaYak to your SeaTalk1 network.
|
|
| And Go... |
Use the SeaYak to wirelessly send your ship's data to Navigation apps like iNavx,
OpenCPN etc. Whether you just want to display your ship's position as you navigate,
or have all your instrument data displayed plus an AIS overlay to keep an eye on other
marine traffic. |
|
| Instrument Repeater... |
Use that old phone or tablet as an instrument repeater. There are lots of apps available for Android and IOS. |
|
| Create your own charts... |
Create your own accurate bathymetric charts in real time. With the yakker sending
data from your sounder to your mobile device running Navionics Boating App available for Android and IOS devices. |
|